{"id":2147,"date":"2022-07-10T11:23:33","date_gmt":"2022-07-10T10:23:33","guid":{"rendered":"https:\/\/monta.com\/uk\/?post_type=help-center&p=2147"},"modified":"2025-10-28T08:38:27","modified_gmt":"2025-10-28T07:38:27","slug":"rolec-installation-guide","status":"publish","type":"help-center","link":"https:\/\/monta.com\/en\/help-center\/rolec-installation-guide\/","title":{"rendered":"GreenFlux Integration Guide"},"content":{"rendered":"
\n

1. Notes<\/h2>\n

Follow the procedure below to set up the service device (laptop) for use with local management for a Windows 10\u00ae <\/b>operating system. Using other types of Operating systems (e.g. Linux\u00ae \/ MAC OS\u00ae) will have their own way of setting up the above given connection requirements. This guide will not elaborate on this.<\/p>\n

2. Change your network settings<\/h2>\n

Here you need to change the network settings of your computer, according to the charge point’s local IP.<\/p>\n

To do so, click on the Internet icon<\/b> in the bottom-right corner of your computer screen. From there, open the “Network & Internet Settings”<\/b> of your device.<\/p>\n

\"\"<\/div>\n

3. Select “Ethernet” from the left panel<\/h2>\n

From the left panel, select the option “Ethernet”<\/b>.<\/p>\n

Then on the left side click on “Change adapter options”<\/b>.<\/p>\n

\"\"<\/div>\n

4. Select the adapter to configure<\/h2>\n

Select the Ethernet adapter to configure, then do a right-button click on it and select \u201cProperties\u201d<\/b>.<\/p>\n

\"\"<\/div>\n

5. Find and select “Internet Protocol Version 4 (TCP\/iPv4)” and click on “Properties”<\/h2>\n

In “Ethernet Properties”, find the Internet Protocol Version 4 (TCP\/iPv4)<\/b>, click on it, and press “Properties”<\/b>.<\/p>\n

\"\"<\/div>\n

6. Select and fill out “Use the following IP addresses”<\/h2>\n

Once you are there, select “Use the following IP addresses”<\/b>, if not selected, and enter the values as following:<\/p>\n

IP address:<\/b> 10.1.0.111<\/p>\n

Subnet Mask:<\/b> 255.255.255.0<\/p>\n

\"\"<\/div>\n

7. Click “OK” and close all windows<\/h2>\n

Click on the “OK”<\/b> button and close all settings windows.<\/p>\n

For the configuration to work properly the adapter needs to be reset by unplugging and re-plugging the LAN cable.<\/p>\n

8. Open your Firewall settings<\/h2>\n

Click on \u201cStart\u201d <\/b>and search for \u201cWindows Defender Firewall\u201d<\/b> (simply type in the start menu). Click on the \u201cWindows Defender Firewall\u201d <\/b>icon that appears.<\/p>\n

\"\"<\/div>\n

9. Open “Advanced settings”<\/h2>\n
\"\"<\/div>\n

10. Look for the rules titled \u201cFile and Printer”<\/b><\/h2>\n

In the middle pane look for the rules titled \u201cFile and Printer Sharing (Echo Request – ICMPv4-In)\u201d<\/b>.<\/p>\n

\"\"<\/div>\n

Make sure that all the rules of that type are enabled. You need to check for the three rules, pointed out on the screen:<\/p>\n