{"id":2283,"date":"2022-07-10T11:23:32","date_gmt":"2022-07-10T10:23:32","guid":{"rendered":"https:\/\/monta.com\/uk\/?post_type=help-center&p=2283"},"modified":"2025-11-19T11:10:23","modified_gmt":"2025-11-19T10:10:23","slug":"orbis-installation-guide","status":"publish","type":"help-center","link":"https:\/\/monta.com\/en\/help-center\/orbis-installation-guide\/","title":{"rendered":"Orbis Integration Guide"},"content":{"rendered":"
\n

Please note<\/b> that when you connect your charge point to Monta, we become the operator of the charge point<\/b>. This means that you need to use Monta to control the charging process.<\/p>\n

1. Connect to your charger’s wifi network<\/h2>\n

You need to first connect the device you are going to perform the installation on (phone, tablet, computer, etc.), to the wifi network, named after your charge point.<\/p>\n

Connect to Wi-Fi network VIARIS UNI, ORB-EVVC3nnnnnnnnnnnn<\/b><\/p>\n

The “nnnnnnnnnnnn” stands for the serial number of the charge point.<\/p>\n

The factory-established password for the VIARIS UNI Wi-Fi network is 12345678<\/b>.<\/p>\n

2. Open your browser to 192.168.4.1<\/b><\/h2>\n

Once connected to the Wi-Fi network, open a web browser and write 192.168.4.1<\/b>, connecting to the charger control web. From there, you can see the charge point’s status, consumption, date and time, as well as manually control its start or completion of charging.<\/p>\n

3. Open the “Network” settings <\/b><\/h2>\n

Now it is time to connect your charge point to your<\/b> wifi network. To do so, please open the settings on the left and click on Network.<\/p>\n

\"\"<\/div>\n

4. Fill in your WiFi network’s details<\/b><\/h2>\n

Once you open the Network tab, go to the “Connectivity”<\/b> section of the page. There you need to insert your wifi’s details<\/b>. Please note that the following screenshot includes an example of a wifi name.<\/p>\n

SSID:<\/b> Your wifi’s name<\/p>\n

Password:<\/b> Your wifi’s password<\/p>\n

To save these settings, click on “Overwrite”<\/b>.<\/p>\n

\"\"<\/div>\n

5. Enable and configure “Touch\/RFID”<\/h2>\n

In the Settings, select “Touch\/ RFID”<\/strong>.<\/p>\n

Toggle on the “Enabled”<\/strong> switch.<\/p>\n

Select “RFID”<\/strong>.<\/p>\n

Check off “Enterprise”<\/strong>.<\/p>\n

To finish the step, click on “Overwrite”<\/strong>.<\/p>\n

\"touch<\/p>\n

6. Under “Settings”, click on “Communications”<\/h2>\n