This guide refers to troubleshooting a charge point that has already been integrated with Monta before.
It’s important to note that Monta’s services do not begin before your charge point is connected to the internet and has a strong and stable internet connection.
Regular fallouts or disconnections can unfortunately interfere with our service as we require an internet connection with the charge point in order for our services to be reliable.
If Monta Charge shows your charge point as “Disconnected”, this means that your charge point lost connection locally to the internet or has a very unstable connection. If this is the case, rebooting from Monta won’t work.
Unplug the charge point from the source of power for about 1 minute and plug it back in.
Wait up to 5 mins and see if the charge point connects to the internet. No action is needed in Monta Charge- if your charge point connects to the internet and is integrated correctly with Monta it will automatically change to “Available” in Monta Charge.
If the steps above did not work, it means that your charge point is still not connected to the internet and therefore cannot connect to Monta. You can try and solve this yourself, and we have some tips and tricks here below – otherwise we advise you to contact a professional to help fix the internet issues on your charge point.
If your charge points are connected to the internet by WiFi signal, here are tips we can offer:
Here are the tips for disconnected charge points, using a SIM card:
We recommend checking out the charge point configuration in the native app or online portal.
Check if you need to update the firmware of the charge point. Some charge points’ firmware can be updated directly from Monta Hub.
Otherwise, you can do this in the charge point’s app or the charge point’s online portal. If there is a firmware update, follow the instructions and install it on your charge point.
Review the installation guide of the charge point carefully to make sure that the OCPP configuration settings are correct, so the charge point is able to connect to Monta.
Please note that this should only be done by people experienced with configuration of charge points. If needed, reach out to an installer or electrician – if you have a service provider who installed it for you, please contact them.
If you have gone through all of the troubleshooting steps above and you are still not able to reconnect the charge point to Monta, we recommend reaching out to a professional, who can examine your connection setup and or/ the hardware. This could for example be whomever you purchased your charge point from.
Contact an installer to receive help with the charge point internet connectivity, OCPP configuration or possible hardware issues.
If the charge point is experiencing hardware issues, you can contact your service provider, who can help you get in touch with a charge point manufacturer if needed.