Skip to content

Rolec UltraCharge Integration Guide

This is a guide that shows how to install Monta on your UltraCharge charge point.

Author avatar
Written by Rasmus Knudsen
Last updated 9 April, 2024

Please note that when you connect your charge point to Monta, we become the operator of the charge point. This means that you need to use Monta to control the charging process.

1. Power up the charge point

Turn on the charge point and wait for it to fully boot.

2. Find and open OCPP settings on the charge point screen

On the charge point screen, navigate to the settings and OCPP section. Here you will be able to change the central server endpoint which will allow the charge point to connect to Monta.

3. Change the OCPP url

In the OCPP settings tab, change the Server domain name to:

ws://ocpp.monta.app:80/chargepointidentity

chargepointidentity = serial number of the charge point, you will have to use this again in Monta app or portal when integrating.

Do not change any other settings, unless you know what you’re doing.

Reboot the charger after the change is made.

Screenshot2022 06 08at11.30.06 48

4. Connecting the charge point to your Monta account

Now you need to add and connect your charge point to your Monta account.

You can do this through either Monta Charge or Monta Hub.

Need to talk to a specialist?
Contact our support team
Platform status:
All Systems Operational

Private users

Start a chat in the Monta app on your mobile device of choice.
Open Monta app
Open hours: 24/7, 365
First reply time: < 5 minutes

Business customers

Sign in to Monta Hub and create a support ticket.
Sign in
Open hours: 07:00 - 23:00 CET
First reply time: < 3 business days

Certified installers

If you're a certified installer, you can book a guided call with a Monta integration specialist.
Book integration call
Open: Mon - Fri 09:00 - 17:00 CET