This is a guide that shows how to install Monta on your charge point. If you want to connect your charge point to your Monta account, please follow the steps in the end of the guide.
Please note that when you connect your charge point to Monta, we become the operator of the charge point. This means that you need to use Monta to control the charging process.
1. Connect your device to the charge point’s WiFi
Begin by connecting your device (Phone, Tablet or Laptop) to the WiFi signal that your charge point is emitting.
WiFi name: ICS-2.4GHz-*******
WiFi password: ics654321
This information can be found on the sticker on the side of the unit.
2. Open a web browser to 192.168.10.1:8080
On the same device, open a web browser, type 192.168.10.1:8080, and hit “Enter”.
Username: install
Password: icspass21
3. Configure the charge point OCPP
Once you login, click on the “Basic” tab and put in these values:
Preset Server: User Defined
OCPP Server Domain: ocpp.monta.app
OCPP Server Port: 443
OCPP Server URL: /
OCPP Identity: make sure to use the Serial Number of the charge point
Security Profile: wss
Save the settings before you continue to the next step.
4. Configure the Network settings of the charge point
Navigate to the “Network” tab in the user configuration page.
Wi-Fi Setup
Internet Access should be set as “Enabled” to allow you to connect the charge point to Wi-Fi.
Wi-Fi SSID
Press the “Scan” button and then select the Wi-Fi from the drop down list.
Wi-Fi Password
Type in the password for the Wi-Fi network.
Now save the settings and reboot the charge point.
5. Connecting the charge point to your Monta account
Now you need to add and connect your charge point to your Monta account.
You can do this through either Monta Charge or Monta Hub.