Connect your charge point

Some charge points require you to install Monta on the charge point before you can connect it to your Monta account. We recommend to check out this section of guides, where you can find your charge point brand and follow the installation steps first.

Add a charge point in Monta Charge

1. Select the Chargers tab
2. Select the Team, where the charge point should be
3. Click on the three dots and select +Connect a charger
4. Select the charge point brand and model
   • Based on the selection, we suggest the kW effect and connector, which you can edit
5. Name the charge point and specify the address
6. Click on Continue

Connect via OCPP

1. Select the OCPP integration option
2. Enter the serial number of the charge point
3. Confirm the charge point information and click on Yes, pair charge point
4. Wait for verification
5. Your charge point is now connected and ready to charge!

Connect via Cloud integration

1. Select the Cloud integration option
2. Login with your Cloud credentials
3. Select the correct charge point
4. Click on Yes, pair charge point
5. Your charge point is now connected and ready to charge!

Connect a charge point with 2 or more sockets

If your charge point has 2 or more sockets, you need to add each one of them as separate charge points in Monta Charge.

1. Add the first socket as a charge point (beginning of this guide)
2. Select the OCPP integration option
3. Select correct position of the socket (Connector)
4. Complete connection process
5. Repeat process from step one for the rest of the sockets